Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 3-132Optional Extension Features
3
Group Coverage Ring Delay 3
The Group Cover Ring Delay option replaces the Delay Ring Interval programmed
on a systemwide basis in releases prior to Release 4.1.
Use this procedure to specify the following:
■ The number of rings before sending calls to Group Coverage when the
sender does not have Primary or Secondary Coverage
or
the receivers are
not available,
and
the Group Coverage receiver is either a Calling Group
only or the QCC queue only (no Group Cover buttons on multiline
telephones).
■ The number of rings in addition to the Primary Cover Ring delay before
sending calls to Group Coverage when the sender has Primary or
Secondary Coverage
and
the receivers are available.
The Group Coverage Ring Delay is programmed for each sender’s extension.
Summary: Group Coverage Ring Delay 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
Factory Setting 3 rings
Valid Entries 1–6 rings
Inspect No
Copy Option No
Console Procedure
→More→More→ → →
Dial sender’s extension→ →Dial no. of rings (1–6)→
→
PC Procedure → → → → →Type sender’s
extension
→ →Type no. of rings (1–6)→ →