Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Procedures
Page 4-146DID Trunks
4
● Single Line Procedure
Console Display/Instructions Additional Information PC
Specify entry mode.
Select
.
Enter the trunk number.
Assign or remove the trunk.
Select
or
.
You may continue to assign or remove DID
trunks from the block by repeating Steps 2 and 3.
Continue to enter trunks for the other trunk block or go to Step 5.
Select
.
Return to Step 2. The block is
displayed on Line 1.
Save your entry.
Select
.
Return to the System Programming menu.
Select
three times.
x
= block entered in Step 4
Dial or type [
nnn
].