Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 4-334System Features
4
Allowed Lists 4
Use this procedure to establish Allowed Lists. These lists are telephone numbers
that can be dialed from specified telephones, regardless of any calling restrictions
that are assigned to the telephones.
A maximum of eight lists (numbered 0 through 7) with a maximum of 10 numbers
each (numbered 0 through 9) are allowed. Each allowed number can be no more
than six digits (an area code plus an exchange) or six digits with a leading 1,
where required.
If you program 0 as the first digit of a list entry, any toll restriction assigned to the
extension is removed for calls that can be placed by a toll operator.
Special characters (such as Pause) are not permitted in Allowed List entries.
Summary: Allowed Lists 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 6g, Call Restriction Assignments and Lists
Factory Setting Not applicable
Valid Entries Area code/exchange (1- to 6-digits with leading 1, if
necessary)
Inspect No
Copy Option No
Console Procedure
→ →Dial list no. and entry no.→
→Drop→Dial no.→ →
PC Procedure → →Type list no. and entry no.→ →
+
→
Type no.→ →