MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 4-398Automatic Route Selection
4
Voice and/or Data Routing 4
Use this procedure to route voice, data, or voice and data. The voice/data
specification is used mainly in conjunction with PRI. See “PRI Facilities” on page
4–165 especially its subtopic, “Outgoing Tables” on page 4–220.
Voice/data routes can be associated with Subpattern A or Subpattern B.
Summary: Voice and/or Data Routing 4
Programmable by System Manager
Mode Hybrid/PBX
Idle Condition Not required
Planning Form Form 3g, Automatic Route Selection Default and
Special Numbers Tables
Factory Setting Voice
Valid Entries Voice Only, Data Only, Voice/Data
Inspect No
Copy Option No
Console Procedure
→ →More→ or →
Dial table no. and route no.→ →Select capability→
→ →
PC Procedure → → →
or
→Type table no. and route
no.
→ →Select capability→ → →
Procedure: Voice and/or Data Routing 4
Console/Display Instructions Additional Information PC
Select the Tables menu.