Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 3-84Extensions
3
Analog Multiline Telephone without Built-in
Speakerphone (BIS) or Hands Free Answer
Intercom (HFAI) Capability 3
Use this procedure to identify analog multiline telephones with flat membrane
buttons that do not have BIS or HFAI capability. The models that must be
identified are 5-button, 10-button, 34-button, and 34-button deluxe analog
multiline models with flat membrane buttons.
Keep the factory setting for analog multiline models with raised plastic buttons,
including the following models: 10-button HFAI, 34-button with speakerphone
(SP-34), 34-button with speakerphone and display (SP-34D), BIS-10, BIS-22,
BIS-34, BIS-22D, and BIS-34D.
This procedure is not necessary for MLX or single-line telephones.
Summary: Analog Multiline Telephones without
BIS or HFAI Capability 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 4b, Analog Multiline Telephone
Form 5a, Direct-Line Console (DLC): Analog
Data Form 1a, Modem Data Workstations
Factory Setting All models of analog multiline telephones (except the
analog multiline display console) have BIS/HFAI capability.
Valid Entries Extension numbers
Inspect Yes
Copy Option No
Console Procedure
→ →Dial ext. no.→
→ →
PC Procedure → →Type ext. no.→ → →