Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 4-255Extensions
4
Assign Intercom or System Access Buttons 4
Use this procedure to assign or change the assignments for Intercom (ICOM)
buttons used to make and receive inside calls. This includes the following types of
Intercom buttons:
■ Ring
■ Voice
■ Originate Only (Ring or Voice)
In Hybrid/PBX mode only, use this procedure to assign or change assignments for
System Access (SA) buttons used to make or receive inside and outside calls.
This procedure includes the following types of System Access buttons:
■ Ring
■ Voice
■ Originate Only (Ring or Voice)
■ Shared (Ring or Voice)
NOTE:NOTE:NOTE:
You cannot change the factory setting for Call buttons assigned to QCC
operator positions, and you cannot assign Ring, Voice, Originate Only, or
Shared buttons to QCC operator positions. However, in Release 4.0 and
later, the Call 5 (Ring/Voice) button on a QCC can be programmed for
Voice Announce. See “Voice Announce” on page 62.
System Access or Intercom buttons can be assigned to only the first 10
buttons on a telephone.
You can assign a combination of up to 10 System Access or Intercom
buttons to each telephone (excluding QCC operator positions).
You can remove System Access or Intercom buttons, but at least one must
remain on the extension.
NOTE:
When single-line sets are programmed with only one System Access
or Intercom button, the Transfer, Conference and Drop features are
disabled. Other features that require a second dial tone, such as
Account Code/Number Entry, After Call Work States, Call Pickup,
Call Waiting, and Privacy, are also affected. For more information,
see the
Feature Reference.