MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Procedures
Page 4-115DS1 Facilities
4
Factory Setting Robbed bit
Valid Entries Robbed Bit, Common Channel
Inspect No
Copy Option No
Console Procedure
→ →Dial slot no.→ →
→Select type of signaling→ → →
PC Procedure → →Type slot no.→ → →Select type of
signaling
→ → →
Procedure: Signaling Mode 4
Console Display/Instructions Additional Information PC
Select the Lines and Trunks menu.
Select Loop-Start/Ground-Start/DS1.
Enter the slot number in the control unit that contains the 100D module
(
nn
= 1 to 17).
Dial or type [
nn
].