Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming with SPM
Page 2-66Upgrading the System
2
■ Table 2–15. Lists the features added with Release 6.0 of the
communications system.
— When you upgrade from Release 5.0 to Release 6.0, you must
program the features listed in Table 2–15
.
— When you upgrade from Release 4.2 to Release 6.0, you must
program the features listed in Table 2–14
, then the features listed in
Table 2–15
.
— When you upgrade from Release 4.1 to Release 6.0, you must
program the features listed in Table 2–13
, then the features listed in
Table 2–14
, then the features listed in Table 2–15.
— When you upgrade from Release 4.0 to Release 6.0, you must
program the features listed in Table 2–12
, then the features listed in
Table 2–13
, then the features listed in Table 2–14, then the features
listed in Table 2–15
.
— When you upgrade from Release 3.1 to Release 6.0, you must
program the features listed in Table 2–11
, then the features listed in
Table 2–12
, then the features listed in Table 2–13, then the features
listed in Table 2–14
, then the features listed in Table 2–15.
— When you upgrade from Release 3.0 to Release 6.0, you must
program the features listed in Table 2–10
, then the features listed in
Table 2–11
, then the features listed in Table 2–12, then the features
listed in Table 2–13
, then the features listed in Table 2–14, then the
features listed in Table 2–15
.
— When you upgrade from Release 2.0 or 2.1 to Release 6.0, you
must program the features listed in Table 2–9
, then the features
listed in Table 2–10
, then the features listed in Table 2–11, then the
features listed in Table 2–12
, then the features listed in Table 2–13,
then the features listed in Table 2–14
, then the features listed in
Table 2–15
.
— When you upgrade from Release 1.1 to Release 6.0, you must
program the features listed in Table 2–8
, then the features listed in
Table 2–9
, then the features listed in Table 2–10, then the features
listed in Table 2–11
, then the features listed in Table 2–12, then the
features listed in Table 2–13
, then the features listed in Table 2–14,
then the features listed in Table 2–15
.
— When you upgrade from Release 1.0 to Release 6.0, you must
program the features listed in Table 2–7
, then the features listed in
Table 2–8
, then the features listed in Table 2–9, then the features
listed in Table 2–10
, then the features listed in Table 2–11, then the
features listed in Table 2–12
, then the features listed in Table 2–13,
then the features listed in Table 2–14
, then the features listed in
Table 2–15
.