Filter
Top Products
RL78/G1A APPENDIX A REVISION HISTORY
(7/8)
Edition Description Chapter
Modification of Figure 22-6. CRC Operation Function (General-Purpose CRC)
Modification of caution in Figure 22-7. Format of RAM Parity Error Control Register
(RPECTL)
Addition of remark to Figure 22-11. Format of Invalid Memory Access Detection
Control Register (IAWCTL)
Addition of description to 22.3.8 A/D test function
CHAPTER 22 SAFETY
FUNCTIONS
Addition of Figure (move from 2.2 Description to Pin Function (preceding editions))
CHAPTER 23
REGULATOR
Modification of description in Figure 24-1. Format of User Option Byte
(000C0H/010C0H)
Modification of Figure 24-2. Format of User Option Byte (000C1H/010C1H)
CHAPTER 24 OPTION
BYTE
Modification of description in 25.1.1 Programming Environment and modification of
Notes in 25.1.2 Communication Mode
Modification of note 1 and addition of note 2 in Table 25-2. Pin Connection
Addition of description to 25.2 Writing to Flash Memory by Using External Device
(that Incorporates UART)
Modification of note in 25.2.2 Communication Mode
Addition of remark to 25.3 Connection of Pins on Board
Modification of description and addition of remark to 25.4.1 Data flash overview
Modification of Figure 25-8. Setting of Flash Memory Programming Mode
Modification of Table 25-5. Programming Modes and Voltages at Which Data Can
Be Written, Erased, or Verified
Modification of description in Table 25-10. Example of Signature Data
Addition of description and caution to 25.6 Security Settings
Addition of 25.7 Processing Time of Each Command When Using PG-FP5
(Reference Values)
Addition of cautions 3, 4 to 25.8 Flash Memory Programming by Self-Programming
modification of value in Table 25-14. Programming Modes and Voltages at Which
Data Can Be Written, Erased, or Verified
CHAPTER 25 FLASH
MEMORY
Modification of Flag status
CHAPTER 28
INSTRUCTION SET
Addition of cautions 2, 3 to CHAPTER 29 ELECTRICAL SPECIFICATIONS (deletion
of Pins Mounted According to Product)
Addition of description, note 3, and remark 2 to 29.1 Absolute Maximum Ratings
Addition of note 2 to 29.2.2 On-chip oscillator characteristics
Modification of note in 29.3.2 Supply current characteristics
Addition of figure to 29.4 AC Characteristics
Deletion of description and value to 29.5.1 Serial array unit
Addition of value to 29.5.2 Serial interface IICA
Modification of 29.6.1 A/D converter characteristics
Rev.0.03
Modification of 29.6.2 Temperature sensor characteristics and 29.6.3 POR circuit
characteristics
CHAPTER 29
ELECTRICAL
SPECIFICATIONS (T
A =
−40 to +85°C) (TARGET)
R01UH0305EJ0200 Rev.2.00 980
Jul 04, 2013