Filter
Top Products
Telephony Hardware Selection and Settings 343
Installation and Maintenance Guide
DECT switch settings
The DECT module supports a maximum of eight DECT radio base station connections. This
module occupies one full DS30 bus, which can support a maximum of 32 cordless handsets when
all eight base stations are deployed. The DECT module should be installed on DS30 6 or 7.
For detailed instructions about using the DECT module, refer to the Business Communications
Manager 3.0 DECT Installation and Maintenance Guide.
Table 66 shows the settings for DS30 6 and 7, and the assigned dialing numbers (DNs).
Table 66 DECT module settings
Select
DS30
bus
Select
offset
Set the switches
Use these
DNs on 3.0
system
Use these
DNs on
updated 2.0
system
**Custom DN rangeOffset DS30 channel
123456
60
on on on on on
597-624* 501-532*
off
7*** 0
on on on on
597-624* 501-532*
off off
*If you need more DNs, use DNs in the 565 to 596 range. Ensure no other devices are assigned to these
DNs before you use them. Change the DN type field to ISDN and DECT.
**The extensions listed are based on a three-digit DN with a Start DN of 221. If your system has longer DNs
or a different Start DN, enter the range in the blank column.
***If your system is configured with a 3/5 channel split, DS30 7 is not available.