Filter
Top Products
142 Chapter 5 Business Communications Manager System Startup
P0993133 03
6 Use the Quick Start Wizard to create the system configuration.
Refer to the Business Communications Manager 3.0 Programming Operations Guide for
details about using the wizard. The Programming Operations Guide provides a detailed record
about the information that you require to configure basic system programming.
Enter the software keycodes
If you have purchased any of the optional Business Communications Manager applications that
require keycode activation, refer to Business Communications Manager 3.0 Software Keycode
Installation Guide. The guide provides information about how to obtain the keycodes from the
Nortel Networks Keycode Retrieval System (KRS) and how to enter them into the Unified
Manager. These codes can be entered after basic system configuration is complete.
Regenerating keycodes after system replacement
If you replace your media services card (MSC), you need to regenerate all your keycodes to reflect
the new system identification. Enter the keycodes after you perform your system data restore.
Access the Nortel Networks Keycode Retrieval System (KRS) website for information on how to
regenerate keycodes.
Warning: If you change this information on an existing system the telephony
programming is erased and the telephony system is disabled for a period of time. The
Business Communications Manager also performs a cold start.