Filter
Top Products
Chapter 12 Install Companion or DECT Systems 267
Installation and Maintenance Guide
Figure 171 Antenna with antenna bracket (USA)
6 Feed the coaxial cable through the wall to the lightning surge protector on the interior wall.
7 This procedure is complete.
Install a lightning surge protector (USA)
Use the procedure in this section to install the lightning surge protector. The surge protector
prevents damage to the Companion components due to electrical surges caused by lighting.
1 Install the lightning surge protector on the interior wall as close as possible to the entry point
of the coaxial cable from the outdoor antenna.
Before you connect the ground lead to the lightning surge protector, attach the ground lead to
an approved ground. Refer to the Wiring information tips box on the next page.
2 Route and connect the coaxial cable from the outdoor antenna to the lightning surge protector.
3 Route and connect the coaxial cable from the lightning surge protector to the appropriate base
station connector. Refer to Figure 172 on page 268.