Filter
Top Products
324 Telephony Hardware Selection and Settings
P0993133 03
Choose the assigned order for modules
Assign the media bay modules and DS30 channels in the order shown in Figure 197.
Station modules are assigned starting with DS30 2. This allows telephones to start numbering from
the system Start DN (Default: 221). The exception to this is a DSM used for Companion, which
must be installed on DS30 6 (DSM32) or DS30 6 and 7 (two DSM 16s). If your system is set to a
3/5 split, you can only assign a DSM16 to DS30 6 for Companion.
Trunk modules are assigned starting at DS30 7, in a system with a 2/6 DS30 split, and at DS30 6 in
a system with a 3/5 split. The exception to this is the 4X16 module and the DDIM, which require
two DS30 buses, so it must be set to a DS30 that has the next channel open.