Filter
Top Products
282 Chapter 13 Install Analog Terminal Adapters
P0993133 03
Figure 182 ATA 2 back view
5 This procedure is complete.
Determine the ATA 2 extension number
Use this procedure to determine the extension number for every Business Communications
Manager ATA 2. Perform this procedure before performing administration.
1 Connect a single-line telephone to the Business Communications Manager ATA 2.
2 Lift the handset.
3 If you do not hear dial tone, press °· to access an intercom line.
4 Dial the extension number of an Business Communications Manager telephone with a display.
If you hear a busy signal, repeat steps 3 and 4 using a different extension number.
5 When the telephone rings, the display shows: Set <nn> calling.
6 The number that appears on the display is the Business Communications Manager ATA 2
extension number. Record the extension number.
7 This procedure is complete.
Note: ° appears as ¿ on some telephones. If you are using a telephone without a ° or ¿
button, refer to the ATA 2 User Guide for details.
Some phones have a Flash button, which is the equivalent to ° or ¿.
Note: The Automatic Set Relocation feature works with Business Communications
Manager ATA 2.
Mounting keyhole slots