Filter
Top Products
190-00498-07 Rev. A
Garmin G1000 Pilot’s Guide for Cessna Nav III
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
587
APPENDIX B
14) Remove the SD card from the top card slot of the MFD.
15) Turn system power ON.
16) Press the ENT Key to acknowledge the startup screen.
17) Turn the large FMS Knob to select the AUX Page group on the MFD.
18) Turn the small FMS Knob to select the System Status Page.
19) Press the Display Database Selection Softkey to show standby navigation database information for each display
(MFD1 DB or PFD1 DB). Verify the correct standby navigation database cycle information is shown for each
display.
GARMIN DATABASES
The following databases are stored on Supplemental Data Cards provided by Garmin:
•Expandedbasemap
•Terrain
•Airportterrain
•Obstacle
•SafeTaxi
•FliteCharts
•AirportDirectory
(AOPA)
After subscribing to the desired database product, these database products will be downloaded and ultimately
stored on two Supplemental Data Cards (with the exception of FliteCharts, which is loaded on only one card).
Each Supplemental Data Card resides in the bottom card of each display as shown in Figure B-7. These cards
must not be removed except to update the databases stored on each card.
Figure B-3 Correct Database Locations
PFD MFD
Since these databases are not stored internally in the displays, a Supplemental Data Card containing identical
database versions must be kept in each display unit.