Garmin G1000 PDAs & Smartphones User Manual


  Open as PDF
of 632
 
190-00498-07 Rev A
Garmin G1000 Pilot’s Guide for Cessna Nav III
545
ADDITIONAL FEATURES
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
8.7 SCHEDULER
The Schedulerfeaturecanbeusedtoenteranddisplayremindermessages(e.g.,Changeoil,Switchfueltanks,
orAltimeter-TransponderCheck)intheAlertsWindowonthePFD.Messagescanbesettodisplaybasedon
aspecicdateandtime(event),oncethemessagetimerreacheszero(one-time;defaultsetting),orrecurrently
wheneverthemessagetimerreacheszero(periodic).Messagetimerssettoperiodicalertingautomaticallyreset
totheoriginaltimervalueoncethemessageisdisplayed.Whenpoweriscycled,allmessagesareretaineduntil
deleted, and message timer countdown is resumed.
Figure 8-80 Scheduler (Utility Page)
Entering a scheduler message:
1) Select the AUX - Utility Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the first empty scheduler message naming field.
4) Use the FMS Knob to enter the message text to be displayed in the Alerts Window and press the
ENT
Key.
5) Press the ENT Key again or use the large FMS Knob to move the cursor to the field next to Type.
6) Turn the small FMS Knob to select the message alert type:
• Event—Message issued at the specied date/time
• One-time—Message issued when the message timer reaches zero (default setting)
• Periodic—Message issued each time the message timer reaches zero
7) Press the ENT Key again or use the large FMS Knob to move the cursor to the next field.
8) For periodic and one-time message, use the FMS Knob to enter the timer value (HH:MM:SS) from which to
countdown and press the ENT Key.
 previous next