Garmin G1000 PDAs & Smartphones User Manual


  Open as PDF
of 632
 
190-00498-07 Rev A
Garmin G1000 Pilot’s Guide for Cessna Nav III
547
ADDITIONAL FEATURES
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
8.8 ELECTRONIC CHECKLISTS
NOTE: The checklists presented here are for example only and may not reflect checklists actually available
for the Cessna NAV III Aircraft. This material is not intended to replace the checklist information presented
in the AFM or the Pilot Safety and Warning Supplements document.
NOTE: Garmin is not responsible for the content of checklists. Checklists are created by the aircraft
manufacturer. Modifications or updates to the checklists are coordinated through the aircraft manufacturer.
The user cannot edit these checklists.
TheoptionalchecklistfunctionsaredisplayedontwolevelsofsoftkeysthatareavailableonanyMFDpage.
Figure 8-82 Checklist Softkeys
CHKLIST
DCLTR
SYSTEM
MAP
The CHECK Softkey label changes to UNCHECK
when the checklist item is already checked.
EXIT CHECKSYSTEM EMERGCY
SHW CHRT
(Optional)
The MFDisable to displayoptionalelectronicchecklistswhich allow apilotto quicklyndtheproper
procedure on the ground and during each phase of flight. The system accesses the checklistsfromanSD card
insertedintothebezelslot.IftheSDcardcontainsaninvalidchecklistleornochecklist,thePower-up Page
messagesdisplay‘ChecklistFile:Invalid’or‘ChecklistFile:N/A’(notavailable)andtheCHKLISTSoftkeyis
not available.
Accessing and navigating checklists:
1) From any page on the MFD, press the CHKLIST Softkey or turn the large FMS Knob to select the Checklist Page.
2) Turn the large FMS Knob to select the ‘GROUP’ field.
3) Turn the small FMS Knob to select the desired procedure and press the ENT Key.
4) Turn the large FMS Knob to select the ‘CHECKLIST’ field.
5) Turn the FMS Knob to select the desired checklist and press the ENT Key. The selected checklist item is
indicated with white text surrounded by a white box.
6) Press the ENT Key or CHECK Softkey to check the selected checklist item. The line item turns green and a
checkmark is placed in the associated box. The next line item is automatically selected for checking.
Either FMS Knob can be used to scroll through the checklist and select the desired checklist item.
Press the CLR Key or UNCHECK Softkey to remove a check mark from an item.
7) When all checklist items have been checked, ‘*Checklist Finished*’ is displayed in green text at the bottom left
of the checklist window. If all items in the checklist have not be checked, ‘*CHECKLIST NOT FINISHED*’ will be
displayed in yellow text.\
 previous next