Garmin G1000 PDAs & Smartphones User Manual


 
190-00498-07 Rev A
Garmin G1000 Pilot’s Guide for Cessna Nav III
521
ADDITIONAL FEATURES
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
WhenachartisnotavailablebypressingtheSHW CHRTSoftkeyorselectingaPageMenuOption,charts
maybeobtainedforotherairportsfromtheWPTPagesorFlightPlanPages.
Ifachartisavailableforthedestinationairport,ortheairportselectedintheactiveightplan,thechart
appearsonthescreen.Whennoightplanisactive,orwhennotyingtoadirect-todestination,pressingthe
SHW CHRTSoftkeydisplaysthechartforthenearestairport,ifavailable.
ThechartshownisoneassociatedwiththeWPT–AirportInformationpage.Usuallythisistheairportrunway
diagram.Wherenorunwaydiagramexists,butTakeOffMinimumsorAlternateMinimumsareavailable,that
pageappears.IfAirportInformationpagesareunavailable,theApproachChartfortheairportisshown.
Selecting a chart:
1) While viewing the Navigation Map Page, Flight Plan Page, or Nearest Airports Page, press the SHW CHRT
Softkey. The airport diagram or approach chart is displayed on the Airport Information Page.
2) Press the
FMS
Knob to activate the cursor.
3) Turn the large FMS Knob to select either the Airport Identifier Box or the Approach Box. (Press the APR Softkey
if the Approach Box is not currently shown).
4) Turn the small and large FMS Knob to enter the desired airport identifier.
5) Press the ENT Key to complete the airport selection.
6) Turn the large FMS Knob to select the Approach Box.
7) Turn the small
FMS
Knob to show the approach chart selection choices.
8) Turn either
FMS
Knob to scroll through the available charts.
9) Press the ENT Key to complete the chart selection.
Select Desired
Approach
Chart from
Menu
Pan Chart
With the
Joystick
Chart Not
To Scale
Aircraft Not
Shown Icon
Figure 8-52 Approach Information Page, Chart Selection