Garmin G1000 PDAs & Smartphones User Manual


 
190-00498-07 Rev. A
Garmin G1000 Pilot’s Guide for Cessna Nav III
12
SYSTEM OVERVIEW
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
1.4 SECURE DIGITAL (SD) CARDS
NOTE:
Ensure the G1000 System is powered off before inserting an SD card.
NOTE:
Refer to Appendix B for instructions on loading database updates.
The PFD and MFD data card slots use Secure Digital (SD) cards and are located on the upper right side of the
display bezels. SD cards are used for storing the various databases and system software updates. Each display
bezel is equipped with two SD card slots. The top slot is used for importing and exporting flight plans, Flight
Data Logging, and loading navigation database updates. The bottom slot of each display contains a Garmin
Supplemental Data Card which is used for storing the various databases.
Not all SD cards are compatible with the G1000. Use only SD cards supplied by Garmin or the aircraft
manufacturer.
Installing an SD card:
1) Insert the SD card in the SD card slot, pushing the card in until the spring latch engages. The front of the card
should remain flush with the face of the display bezel.
2) To eject the card, gently press on the SD card to release the spring latch.
Figure 1-6 Display Bezel SD Card Slots
SD Card Slots