Garmin G1000 PDAs & Smartphones User Manual


  Open as PDF
of 632
 
190-00498-07 Rev. A
Garmin G1000 Pilot’s Guide for Cessna Nav III
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
361
HAZARD AVOIDANCE
CELL AND STRIKE MODE ON THE NAVIGATION MAP
OntheNavigationMap,cellmodeidentiescellsoflightningactivity(Figure6-112).Stormscopeidenties
clustersofelectricalactivitythatindicatecells.Strikemodeindicatestheapproximatelocationoflightning
strikes.
Selecting the ‘cell’ or ‘strike’ mode on the Navigation Map:
1) Press the MENU Key.
2) With ‘Map Setup’ selected, press the ENT Key.
3) Select the ‘Weather’ group.
4) Press the ENT Key. The cursor flashes on ‘STRMSCP LTNG’.
5) Turn the
large FMS
Knob to select ‘STRMSCP MODE’.
6) Turn the
small
FMS Knob to change between ‘CELL’ and ‘STRIKE’ options. When an item is selected, press the
ENT Key.
7) Press the
FMS
knob to return to the Navigation Map Page.
Figure 6-112 Navigation Map Page with
Stormscope Lightning Data
Stormscope
Enabled
Lightning
Strikes
If headinginputis lost, strikesand/orcells mustbecleared manuallyafterthe execution ofeachturn
(Figure6-113).Thisistoensurethatthestrikeand/orcellpositionsaredepictedaccuratelyinrelationtothe
nose of the aircraft.
 previous next