Garmin G1000 PDAs & Smartphones User Manual


  Open as PDF
of 632
 
190-00498-07 Rev. A
Garmin G1000 Pilot’s Guide for Cessna Nav III
117
AUDIO PANEL AND CNS
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
MARKER BEACON RECEIVER
NOTE: The marker beacon indicators operate independently of marker beacon audio and cannot be turned
off.
The marker beacon receiver is used as part of the ILS. The marker beacon receiver is always on and detects
any marker beacon signals within the reception range of the aircraft.
The receiver detects the three marker tones – outer, middle, and inner – and provides the marker beacon
annunciationslocatedtotheleftoftheAltimeteronthePFD.
Figure 4-27 Marker Beacon Annunciations on the PFD
Outer Marker
Indication
Middle Marker
Indication
Inner Marker
Indication
Figure 4-28 Marker Beacon Keys
TheAudioPanelprovidesthreedifferent statesof markerbeaconoperation;On,Muted,andDeselected.
Pressing the
MKR/MUTE
Key selects and deselects marker beacon audio. The key annunciator indicates when
marker beacon audio is selected.
Duringmarkerbeaconaudioreception,pressingthe
MKR/MUTE
Key mutes the audio but does not affect the
markerannunciations(Figure4-27).Themarkertoneissilenced,thenwaitsforthenextmarkertone.The
MKR/MUTE
KeyAnnunciatorisilluminated,indicatingaudiomuting.Theaudioreturnswhenthenextmarker
beacon signal is received. If the
MKR/MUTE
Key is pressed during signal reception (O, M, I indication) while
marker beacon audio is muted, the audio is deselected and the
MKR/MUTE
KeyAnnunciatorisextinguished.
Pressing the HI SENS Key switches between high and low marker beacon receiver sensitivity. The HISENS
function (annunciator illuminated) is used to provide an earlier indication when nearing a marker during an
approach. The LOSENSfunction(annunciatorextinguished)resultsinanarrowermarkerdwellwhileovera
station.
 previous next