Filter
Top Products
190-00498-07 Rev. A
Garmin G1000 Pilot’s Guide for Cessna Nav III
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
577
APPENDIX A
MISCELLANEOUS MESSAGE ADVISORIES (CONT.)
Message Comments
[PFD1 or MFD1]
CARD 1 ERR
–
Card 1 is invalid.
The SD card in the top card slot of the PFD or MFD contains invalid data.
[PFD1 or MFD1]
CARD 2 ERR
–
Card 2 is invalid.
The SD card in the bottom card slot of the PFD or MFD contains invalid data.
TRN AUD FAIL
– Trn Awareness
audio source unavailable.
The audio source for terrain awareness is offline. Check GIA1 or GIA 2.
TERRAIN AUD CFG
– Trn Awareness
audio config error. Service req’d.
Terrain audio alerts are not configured properly. The system should be serviced
FLIGHT PLAN IMPORT/EXPORT MESSAGES
In some circumstances, some messages may appear in conjunction with others.
Flight Plan Import/Export Results Description
‘Flight plan successfully imported.’ A flight plan file stored on the SD card was successfully imported as a stored
flight plan.
‘File contained user waypoints only. User
waypoints imported successfully. No stored
flight plan data was modified.’
The file stored on the SD card did not contain a flight plan, only user
waypoints. These waypoints have been saved to the system user waypoints.
No flight plans stored in the system have been modified.
‘No flight plan files found to import.’ The SD card contains no flight plan data.
‘Flight plan import failed.’ Flight plan data was not successfully imported from the SD card.
‘Flight plan partially imported.’ Some flight plan waypoints were successfully imported from the SD card,
however others had errors and were not imported. A partial stored flight plan
now exists in the system.
‘File contained user waypoints only.’ The file stored on the SD card did not contain a flight plan, only user
waypoints. One or more of these waypoints did not import successfully.
‘Too many points. Flight plan truncated.’ The flight plan on the SD card contains more waypoints than the system can
support. The flight plan was imported with as many waypoints as possible.
‘Some waypoints not loaded. Waypoints
locked.’
The flight plan on the SD card contains one or more waypoints that the system
cannot find in the navigation database. The flight plan has been imported, but
must be edited within the system before it can be activated for use.
‘User waypoint database full. Not all loaded.’ The flight plan file on the SD card contains user waypoints. The quantity of
stored user waypoints has exceeded system capacity, therefore not all the user
waypoints on the SD card have been imported. Any flight plan user waypoints
that were not imported are locked in the flight plan. The flight plan must be
edited within the system before it can be activated for use.
‘One or more user waypoints renamed.’ One or more imported user waypoints were renamed when imported due to
naming conflicts with waypoints already existing in the system.
‘Flight plan successfully exported.’ The stored flight plan was successfully exported to the SD card.
‘Flight plan export failed.’ The stored flight plan was not successfully exported to the SD card. The SD
card may not have sufficient available memory or the card may have been
removed prematurely.