Garmin G1000 PDAs & Smartphones User Manual


  Open as PDF
of 632
 
190-00498-07 Rev. A
Garmin G1000 Pilot’s Guide for Cessna Nav III
128
AUDIO PANEL AND CNS
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
PASSENGER ADDRESS (PA) SYSTEM
Apassengeraddresssystemisavailablefordeliveringvoicemessagesoverthecabinspeakerinthe(T)182T
and(T)206Honly.WhenthePAKeyisselectedontheAudioPanel,theCOMMICAnnunciatorisextinguished,
and the active COM frequency changes to white, indicating that there is no COM selected. A Push-to-Talk
(PTT) must be pressed to deliver PA announcements. The PA Annunciator flashes about once per second while
the PTT is depressed.
Figure 4-43 PA Key Selected for Cabin Announcements
PA
Key is Selected on
the Audio Panel
CLEARANCE RECORDER AND PLAYER
TheAudioPanelcontainsadigitalclearancerecorderthatrecordsupto2.5minutesoftheselectedCOM
radiosignal.RecordedCOMaudioisstoredinseparatememoryblocks.Once2.5minutesofrecordingtime
have been reached, the recorder begins recording over the stored memory blocks, starting from the oldest
block.
The PLAY Key controls the play function. Pressing the PLAY Key once plays the latest recorded memory
block.ThePLAYAnnunciatorashestoindicatewhenplayisinprogress.ThePLAYAnnunciatorturnsoff
after the present memory block has finished playing.
Pressing the
MKR/MUTE
Key during play of a memory block stops play. If a COM input signal is detected
during play of a recorded memory block, play is halted.
Pressing the PLAYKeywhileaudioisplayingbeginsplayingthepreviouslyrecordedmemoryblock.Each
subsequent press of the PLAY Key selects the previously recorded memory block.
Powering off the unit automatically clears all recorded blocks.
Figure 4-44 Marker Mute and Play Keys
PLAY
Key
Controls the
Memory Function
MKR/MUTE
Key Stops
Play
 previous next