Fujitsu MB89950/950A Pager User Manual


 
127
CHAPTER 7 8-BIT PWM TIMER
8-bit PWM timer registers
Figure 7.3-2 8-bit PWM timer registers
Note:
As the PWM compare register (COMR) is write-only, the bit manipulation instructions cannot be used.
8-bit PWM timer interrupt source
IRQ2:
For the interval timer function, the 8-bit PWM timer generates an interrupt request if interrupt request
output is enabled (CNTR: TIE = "1") when the counter value matches the value set in the COMR
register. (For PWM function, no interrupt request is generated.)
CNTR (PWM control register)
COMR (PWM compare register)
Address Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Initial value
0012
H
P/T P1 P0 TPE TIR OE TIE 0-000000
B
R/W R/W R/W R/W R/W R/W R/W
Address Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Initial value
0013
H
XXXXXXXX
B
WWWWWWWW
R/W: Readable and writable
W : Write-only
: Unused
X : Indeterminate