Filter
Top Products
108
CHAPTER 5 TIMEBASE TIMER
■ Operation of timebase timer
The state of following operations are shown in Figure 5.5-2 "Operation of timebase timer".
• A power-on reset occurs.
• Goes to sleep mode during operation of the interval timer function in the main clock mode.
• Goes to stop mode.
• A counter clear request occurs.
The timebase timer is cleared by going to stop mode, and its operation is stopped. The timebase timer
counts the oscillation stabilization delay time after wake-up from stop mode.
Figure 5.5-2 Operation of timebase timer
Counter value
1FFFFF
H
Oscillation stabilization
delay overflow
0000
H
Power-on reset
(optional)
CPU operation starts
Interval cycle
(TBTC: TBC1, TBC0 = “11
B
”)
Cleared by the interrupt
processing
routine.
Cleared by
going to
stop mode.
Counter clear
(TBTC: TBR = “0”)
TBIF bit
TBIE bit
SLP bit
(STBC register)
STP bit
(STBC register)
Sleep mode
Wake-up from sleep mode
by IRQ6
Stop mode
Wake-up from stop mode by an external interrupt
: Indicates the oscillation stabilization delay time.
For the case when the interval time selection bits in the timebase timer control register
(TBTC: TBC1, TBC0) are set to "11
B
" (2
21
/FCH).