Filter
Top Products
GENERAL INFORMATION
BU-ITON DESCRIPTIONS
BUTTON DESCRIPTIONS (continued)
CALL FORWARD-NO ANSWER BUTTON m
Whenever the called station does not answer after either three
rings or 12 seconds, whichever occurs first, this feature forwards
calls to another station.
ACCOUNT CODE BUTTON B
Allows a station user to enter a voluntary account code anytime
during a CO line call without interrupting the conversation.
ALARM RESET BUTTON m
A station programmable option that will turn off the digital
telephone alarm if connected to a facility alarm mechanism.
ALL CALL VOICE PAGE BUTTON
q
A single dedicated button that allows a station to voice page all
of the digital/electronic telephones in the system simultaneously.
AUTOMATIC BUSY REDIAL BUTTON m
Allows the user to set up an Automatic Busy Redial after
receiving busy tone on a dialed CO line call.
AUTOMATIC CALLBACK BUTTON m
Recalls a busy or Do Not Disturb station on intercom as soon as
that station becomes idle. Also used for CO line queuing.
BACKGROUND MUSIC BUTTON m
Allows background music to be switched on/off the station
speaker.
CALL FORWARD-ALL CALLS BUTTON m
With this feature, all calls will forward to another station.
CALL FORWARD-BUSY BUTTON m
Whenever the called station is busy, this feature forwards calls
to another station.
CALL FORWARD-BUSY/NO ANSWER BUTTON m
Whenever the called station is busy or does not answer prior to
a predetermined period, this feature forwards calls to another
station. If the called station is busy, the calls forward immediately.
All non-answered calls (station is not busy) forward after either
three rings or 12 seconds, whichever occurs first.
CALL FORWARD-FIXED BUTTON m
Sets Call Forward to a station assigned in system programming.
NOTE:
CO line calls will forward on/y if the CO line is programmed
to ring at one station. If a CO line is programmed to ring at
more than one station, the CO line will not forward.
CALL PICKUP BUTTON m
Initiates directed call pickup of CO line, intercom, and page calls.
CALL PICKUP BUTTONS m and m
If the system is shared by two tenants, the m button picks
up Tenant 1 ringing CO line calls and them button picks up
Tenant 2 ringing CO line calls.
CENTRAL OFFICE LINE BUTTON m
Accesses an outside line.
CONFERENCE/TRANSFER BUTTON m
Sets up conference and transfer calls.
DATA BUlTON m
Allows manual dialing for internal data calls.
See
the
Data In-
terface User Guide.
DATA RELEASE BUTTON m
Releases data calls.
See
the
Data Interface User Guide.
DIRECT STATION SELECTION BUTTON(s) w
Rings a preselected station. The LED associated with each m
button provides the status (idle/busy) of the station assigned to
the button.
2