REMOTEAOMIN & MAINTPROCEDURES
SECTION 200-096-600
FEBRUARY1991
TABLERM-AY
PROGRAM 55-2
LCR MODIFIED DIGITS-END
iTEP
ACTION
DISPLAY/PRINTOUT
1
Enter Program Mode
>MODE PROG
At the >MODE prompt, enter B H B 1
q
P
2 Enter Program Number 55
P 55
Press
q
. P55
3 Enter Modified Digits Table Number
P55 1
Refer to the System Record Sheet and enter the required
modified digits table number (1 - 6).
Example: Enter table number 1, enter 0.
4
Enter Code 2
p55 12
nnn (up fo22digifs)
The system will display any previously entered digits (up to 22).
1234P3
Refer to the System Record Sheet and enter new numbers,
if required.
Example: Enter 1 u 11 i m .
NOTE: Pause codes may also be entered. To enter pauses,
press “P”plus the pause number (I - 8).
Special Code Input
Pause = Na - NB
Tone = 0 at beginning of digits to convert.
Clear = m as first digit, then
q
5 To Exit Program/Store Data
P55 12
otlotl (up to 22digits)
A) To store data, press [9 .
1234P3
9) Continue returning to step 3 until all data has been entered
P55 ##
for this program.
P
C) To exit this program, press4 1
q
-4B-