Filter
Top Products
FEATURE USE
FEATURE USE
DOOR PHONE (continued)
BACKGROUND MUSIC (BGM) (continued)
TO USE A DOOR PHONE
1) Press the button and then release it.
l
You hear a distinctive ringing tone.
2) When answered, speak at a normal voice level in the
direction of the door phone.
HANDSFREE MONITORING
Calls placed on hold by the distant party may be monitored
handsfree.
TO USE HANDSFREE MONITORING
1) While connected to a call, press and hold the m
button.
2) Place the handset on-hook.
3) Release the m button.
l
Sounds from the distant party are heard via the
telephone’s speaker.
4) Lift the handset to continue the conversation when the
distant party returns.
ALARM RESET
A programmable option used with an optional alarm system to
on the system’s electronic telephone.
button resets the alarm signal on the
telephones.
,
BACKGROUND MUSIC (BGM)
If a BGM music source is connected to your system, you may
listen to background musicviayour station’s speaker, or over the
external page speakers.
TO LISTEN TO BGM ON YOUR TELEPHONE SPEAKER
Press the w button and dial 110 (or press the m button).
l
Adjust volume with the VOL control on the front of your
phone.
TO CANCEL BGM ON YOUR TELEPHONE SPEAKER
Press the m button and dial 111 (or press the m button).
TO CONTROL BGM VOLUME
1) Press them button.
2) Press the m button and adjust to the desired level
while listenin to system Intercom tone.
3) Press d
after setting volume level.
l
The relative volume level of BGM will be the same as
Intercom tone.
BACKGROUND MUSIC OVER EXTERNAL SPEAKERS
NOTE:
Stationnumber200is theonlystation thatcan turn External
BGM on/off.
TO ALLOW BGM OVER EXTERNAL PAGE
Press the m button and dial 110.
TO CANCEL BGM OVER EXTERNAL PAGE
Press the m button and dial 111.
DIRECT INWARD SYSTEM ACCESS (DISA)
When calling into your system from the outside on certain
telephone lines.
TO MAKE A DIRECT INWARD STATION CALL USING DISA
1) Using a DTMF telephone, call the DISA CO line telephone
number. -
2) Listen fox ringback tone signal, and then listen for the
intercom dial tone’ (if busy tone is received, try again).
3) Dial the intercom number of the desired station.
l
You will be connected when the station answers*,
. . . or. . .
All
41