Filter
Top Products
REMOTEAOMlN&MAlNTPROCEDURES
SECTION 200-096-600
FEBRUARY1991
TABLERM-AV
PROGRAM54
LCR ROUTE DEFINITION
STEP
ACTION
DISPLAY/PRINTOUT
1
Enter Program Mode
>MODE PROG
At the >MODE prompt, enter i 0 m H
q
. P
2
Enter Program Number 54
P 54
Press
q
. P54
3 Enter Route Plan Number
P54 1
Refer to the System Record Sheet and enter the required
route plan number (1 - 8).
Example: Route plan 1, enter 1.
4 Enter Route Definition Number
P54 12 11 32
Refer to the System Record Sheet and enter the required
route definition number (1 - 4).
Example: Enter route definition number 2, enter 1 .
The system will display the previously entered CO line
group number (1 - 8) and the modified digits table number (1 - 6).
Refer to the System Record Sheet and enter the CO line
group and modified digit numbers as required, then press
q
.
Example: Change the CO line grou
modified digits table to 2. Enter: 1
Ii
number to 3 and the
q
.
L
!Y
Modified Digit Table No.
CO Line Group No.
Route Definition No.
Plan No.
5
To Exit Program/Store Data
P54 12
11
32
A) To store data, press
q
P54
##
B) Continue returning to step 3 until all data has been entered P
for this program.
C) To exit this program, press 1 1
q
.
-45-