Filter
Top Products
16
VOICE MAIL
(continued)
TO RETRIEVE MESSAGES
Press the m and m buttons.
TO CLEAR ALL DIGITS
1) Press the m button.
2) Dial~~~orI~~.
3) Press the b button.
NOTES:
1. The above procedures are required for initial VM set-up
only. The digits remain in memory until changed.
2, Digits are not sent to camped-on VM calls.
BUSY FIELD DISPLAY
TO DISPLAY BUSY FIELD STATUS ON THE LCD DISPLAY
1) Press the m button.
l
The LCD displays, MODE NO.?
2) Dial 1. Refer to the figure in Summary of LCD Functions.
3) Press the m button to rotate Busy Field groups.
MODE EXIT
TO EXIT ANY MODE
1) Press the m button.
l
The LCD displays, MODE NO.?
2) Dial 1.
l
The LCD displays date/day/time.
DISA SECURITY CODE: ADD/DELETE/CHANGE
From desighated station(s) only.
TO STORE NEW DISA SECURITY CODE
1) Press the m button and dial 0 D cI1 (3-digit access code).
DISA SECURITY CODE: ADD/DELETE/CHANGE
(continued)
l
Receive confirmation tone.
-1
2) Dial the new DISA security code (Q . . . Q).’
3) Press the 1 button.
l
Receive confirmation tone.
NOTES:
1. Forsecuritypurposes, the 3-digit access code is notgiven
in this guide. It is available from your telephone system
maintenance provider.
2. The DISA security code can be 1 m 15 digits.
3. To cancel the DISA code, complete steps 1 and 3,
skipping step 2. If the DISA code is canceled, outgoing
access of CO lines on DISA calls willnot require a security
code.
TOLL RESTRICTION OVERRIDE/TRAVELING
CLASS CODE CHANGE
TO ADD, DELETE, OR CHANGE TOLL RESTRICTION
OVERRIDE OR TRAVELING CLASS’ CODES FROM
STATIONS SELECTED IN SYSTEM PROGRAMMING.
1) Press m and dial the three-digit toll restriction override
change access code Cl Q Q.2
l
You will hear confirmation tone.
-1
2) Dial the four-digit override code 0 CI Q Q. ,
k... i
i
17