PROGRAMMINGPROCEDURES-INSTRUCTIONWSYSTEMRECORDS
SECTION 200-096-302
FEBRUARY1991
PROGRAM79
DOOR PHONERINGING
(PORTSOO-31)
SELECT = Port Number
Key LEDs
Enter the port number having
Select keys indicated in the
Door Phone Ringing
table below.
assigned.
Feature
I
Kf
LE
?Y
Port Numbers 00-31
:D 00~01/02~03104 05 06 0708/09/10 11 12 13 14 15
16 17 18 19 20 21 22 23 24 25 26 272829 30 31
IMuted ringto busy EKT/DK$l 20 1
/ /
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Ports 32 - 95 on next page. The same notes apply to all ports.
3. Initialized data does not assign door phone ringing to any station port.
All LEDs are OFF.
4. A range of ports may be entered by keying in the following: noHa
/ \
Lowport
High port
in range in range
I
5. Door phones can ring any number of elecfronic and digital telephones, but do
not ring
standard telephones or ofher devices connected to PESU or PSTU station ports.
6. On/y the lowest port in a ringing group will receive muted ring tone if all EKTs/DKTs
in
the
ringing group are busy and the door phone key is pressed.
2-112