Filter
Top Products
PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 200-096-302
FEBRUARY 1991
I
PROGRAM 36
FIXED CALL FORWARD (VOICE CALLS ONLY)
/ -7
SELECT = Port Number (00-95)
FORWARD TEL = Port Number (00-95)
Enter the port number of the Enter the port number of
station that needs a Fixed
the station or VM port that
Call Forward location
will be call forwarded to
assigned. See Note 3 for when the Fixed Call Forward
a range of ports.
key is pressed.
32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. initialized data does not assign a Fixed Call Forward location to any port.
3. To enter a range of ports, key in the following sequence: nom00
/ \
4. Press LED/key 0 1 to enter blanks.
Low port High port
5. See Program
39, code 86, to assign Fixed Call Forward keys on EKTs.
6. Fixed Call Forward will forward all calls to the designated port.
7. Stations that have fixed call forward set will not ring.
8. Program
92-9 does not clear fixed call forward memory.
2-80