Filter
Top Products
PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 200-096-302
FEBRUARY 1991
SETTING THE DATE,
TIME AND DAY
HOW TO SET THE DATE
The date can be set only from the electronic or digital telephone assigned to port 00. Press
the following key sequence with the handset on the hook:
Date in year/month/day
format (YYMMDD). If month
or day is a single digit, precede
with a zero (0).
l-
If the EKT
has a Redial key
programmed, press
it instead,
HOW TO SET THE TIME
The time can be set only from the electronic or digital telephone assigned to port 00. Press
the following key sequence with the handset on the hook:
- #
II
Time in hours/minutes/seconds d
If the EKT
format (HHMMSS from 000000 to
235959). If any of these values is
has a Redial key
a single digit, precede with a zero (0).
programmed, press
it instead.
HOW TO SET THE DAY
The date can be set only from the electronic or digital telephone assigned to port 00. Press
the following key sequence with the handset on the hook:
piqI”Tmn-n-m
l-l-
Enter the digit for today’s day: 1
If ‘the EKT
1 = Sunday
2 = Monday
has a Redial key
3 = Tuesday
programmed, press
it instead.
4 = Wednesday
5 = Thursday
6 = Friday
7 = Saturday
I
RDL
NOTES:
1. The date, time and day can be set immediately following initialization or after programming is Gocompleted.
2.
1
The system should not be in programming mode for the date, time and day to be set.
3. Set date, time and day from station 200, connected to PEKU or PDKU port 00.
2-122