Toshiba DK56 Telephone User Manual


 
INSTALLATION-PCB
SECTION 200-096-206
FEBRUARY1991
TABLE6-D
PESUCONTROLSANDINTERFACECONNECTORS
I I
.
CONTROL/INDICATOR/
CONNECTOR (Figure 6-7)
TYPE OF COMPONENT DESCRIPTION
Off-hook Call
Announce PlO
1 O-pin connector
Interface connector for optional Off-hook
Call Announce subassembly
connector (used in conjunction with P20,
P40. P50. and P60).
Off-hook Call
Announce P20
Off-hook Call
Announce P40
Off-hook Call
Announce P50
Off-hook Call
Announce P60
1 O-pin connector
1 O-pin connector
1 O-pin connector
1 O-pin connector
Interface connector for optional Off-hook
Call Announce subassembly
connector (used in conjunction with PlO,
P40, P50. and P60).
Interface connector for optional Off-hook
Call Announce subassembly
connector (used in conjunction with PlO,
P20, P50, and P60).
Interface connector for optional Off-hook
Call Announce subassembly
connector (used in conjunction with PlO,
P20, P40, and P60).
Interface connector for optional Off-hook
Call Announce subassembly
connector (used in conjunction with PlO,
P20. P40. and P50).
Ring Voltage Jumper
Plug P90
Three-terminal jumper
Sets ring generator voltage level for
circuits 1 and 2.
H = 19OV P-P (factory setting)
L= 130v P-P
Door Phone W9 Jumper
Wire
White jumper wire
When cut, configures PESU, circuit 5 for
installation of an optional HDCB.
BGM W7 Jumper Pack White jumper wire
When cut, configures PESU, port 07,
circuit 8, for BGM source connection
(slot 01 only)
6.10 PESU Hardware Options
6.11
The PESU supports the following hardware
6.12 Off-hook Call Announce (EOCU) Installa-
tion.
Install the Off-hook Call Announce in accor-
dance with the following steps:
options:
l
Internal option:
Off-hook Call Announce
(EOCU).
1) Remove the PCB from its protective packag-
ing.
l
Externbl option:
Door Phone/Lock.
NOTE:
Refer to Telephone Installation, Section ZOO-
096-207, for installation of external options.
NOTE:
PEW connectors PlO, P20, P40, P50, and
P60 are positioned to allow installation qf the
EOCU only in the proper position (refer to
Figure 6- 7).
6-13