Filter
Top Products
PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 200-096-302
FEBRUARY 1991
another program
more data
~~~~T;ll~nn~!~...~-~l;in~!~~~~,
/T/T\
Step 1 Step 2 Step 3 Step 4
Step 5
Enter Program Mode
Enter Program Number
Enter Program Data Exit Current Program Exit Program Mode
NOTE:
IhI\-! ..
Varies depending upon how the
Automatic Off-hook Preference
is programmed. It can be:
I
-I
Z
Normal, when port 05 is set with auto preference code 01 in Program 32
Note If m and m keys are on
the programming telephone.
FIGURE P-P-PROGRAMMING KEY SEQUENCE OVERVIEW
The System Record contains programming forms for
Programs
00 - 97. A System Record should be filled
out for each system installed as detailed in Chapters 1 and 2.
Each programming form is supplemented with a guide for entering data from the form. The guide illustrates
the key sequence a programmer must press, with the exception of sequences common to all programs, e.g.,
entering programming mode (A), exiting current program (Z), and exiting programming mode (Z). To save space,
these common sequences are coded, as illustrated in
Figure
2-2. The m and m keys are also coded ‘3
and “H” to save space.
NOTE:
Programs 90,92, and 03 are out of order and placed in frontpurposely because they must always be completed first,
and in this order. Upon completing these steps, begin with Program 00.
2-46