Filter
Top Products
DDSS/DSS CONSOLE CALL FORWARD
OVERRIDE
Calls to Forwarded stations will ring the dialed station and will not
forward. This feature can be used to notify a person who forgets
to deactivate the call forward feature after returning to the office.
TO RING A FORWARDED STATION:
Call that station from your dialpad and not the console’s m
button assigned to that station.
NOTE:
This option may be reversed in system programming; i.e.,
m button calls will not forward and telephone dialpad
calls will.
NIGHT TRANSFER
1) Different ringing patterns are chosen by pressing the
q
button (NT1 or NT2, see notes).
2)
Depending upon system programming, either two or three
night transfer patterns are available. The active pattern is
shown by the state of the NT LED:
Three-pattern Two-pattern
DAY OFF OFF
DAY 2 FLASH N/A
NIGHT ON ON
NOTES:
1. For Non-tenant Service: Ringingpattern can be changed
by any DSS console(s).
2. Fqr Tenant Service: CO lines are assigned and con-
trolled independently:
NTl, TENANT 1 CO Lines
NT2, TENANT 2 CO Lines
3. In Tenant Service, one system is split so two busi-
nesses can use their telephones independently of
each other.
DATE/TIME/DAY ADJUSTMENT
This operation is possible from port 00 only (usually station 200).
Station 200 is typically an attendant station for a DSS console.
TO SET DATE
1) Place handset on-hook.
2) Dial m110.
3) Dial the time (year/month/day) in the format YYMMDD.
Enter a leading 0 for any single digit month or day.
4) Press the [ (or m button.
0 Listen for confirmation tone.
TO SET TIME
1) Place handset on-hook.
2) Dial WiII.
3) Dial the time (hour/minute/second) in the 24-hour clock
format HHMMSS. Enter a leading’0 for any single digit
entered.
4) Press the 1 (or m ) button.
0 Listen for confirmation tone.
TO SET DAY
1) Place handset on-hook.
2) Dial WIiI.
3) Dial the day
l
1 = Sunday
l 2 = Monday
03 = Tuesday
l 4 = Wednesday
l 5 = Thursday
06 = Friday
07
= Saturda
4) Press the i (or -
l
cd
button.
0 Listen for confirmation tone.
4
5