Filter
Top Products
q
LINE BUTTONS
Provides direct access of individual CO lines for incoming and
outgoing calls. In most cases, only those CO lines that cannot fit
on the accompanying electronic telephone will be placed on the
DSS.
DIRECT STATION SELECTION m BUlTONILED
Provides one-touch dialing to call another station. A dedicated
button may be provided for each station up to the limits of the
console(s). The associated LED displays the busy/idle status of
the station.
NIGHT TRANSFER BUTTON m
Controls the system’s CO/PBX line ringing atterns. Different
ringing patterns are chosen by pressing the
iii
button.
SPEED DIAL BUTTONS
q
Provides one-touch dialing of up to 20 digits for each button after
accessing dial tone. Personal and System Speed Dial numbers
may be flexibly assigned.
* These buttons may be programmed as DSS, GO line, or Speed
Dial buttons.
OPERATIONS
ALL CALL PAGE
TO PAGE ALL STATIONS:
1) Lift the handset.
2) Press the
q
button.
l
AC LED lights steadily.
3) Make your announcement in a normal voice level.
4) Hang up when you have completed your announcement.
CALL ANSWERING CO LINE/INTERCOM
Use the same procedures as with an electronic or digital tele-
phone.
TO TRANSFER A CO LINE CALL TO AN IDLE STATION:
1) Press the m button corresponding to the station to be
called.
l
CO line is placed on hold automatically.
l
CO LED flashes at double the On-hold rate.
l
DSS console station LED flashes.
l
You hear a single ring tone.
2) Announce the call. You can speak with the station user
without pressing any other buttons.
3) Hang up.
l
CO LED changes to the On-hold flash rate.
l
CO line rings the called station.
l
CO LED illuminates steadily when the called station
connects with the transferred call.
TO TRANSFER A CO LINE CALL TO A BUSY STATION:
1) Press the m button corresponding to the station to be
called.
l
CO line is placed on hold automatically.
l
CO LED flashes at double the On-hold rate.
l
DSS console station LED flashes.
l
You hear a single ring tone.
2) Hang up.
l
CO LED changes to the On-hold flash rate.
l
CO line rings the called station.
l
CO LED illuminates steadily when the called station
connects with the transferred call.
NOTES:
1. The call will recall you and camp-on is cancelled if the
station does notpick it up within a pre-determined time.
Inform the caller of the situation, and repeat the proce-
dure (if necessary).
2. You may reconnect to a transferred line (anytime before
it is answered) by pressing the appropriate
q
button.
3. The Busy Override feature may be used instead of Gall
Transfer with Camp-on. See the Electronic or Digital
Telephone User Guide for details.
CALL TFANSFER WITH CAMP-ON
Allows you to transfer an outside call to a station that is either
busy or idle.
3
,