Filter
Top Products
PROGRAMMINGPROCEDURES-INSTRUCTlONS/SYSTEMRECORDS
SECTION 200-096-302
FEBRUARY1991
RELEASE3(R3)SOFTWAREGUlDE
All items available with RI and R2 software are available with R3
software; items listed below are available with R3 software only.
Item Description
Night ringing over selected
page zones
*Related Programs Comments
77-1, key/LEDs 10 - 13
Allows CO lines to ring over selected PIOU
B,i -3
page zones. CO lines can be placed into
two groups (tenant 1 and tenant 2), and
each group can be assigned to night ring
over different PIOU paging zones.
Digital telephone volume level
initialization
92-5, keys/LEDs 01 and 05 Sets digital telephone volume levels to
their initialized settings: ring, busy override,
Intercom (muted) ring, speaker, and BGM.
Digital telephone handset receive
volume level set for individual
telephones
30, keys/LEDsl2 and 13
Initialize data is Level 3.
Allows the initial off-hook volume level to
be set individually for each digital tele-
phone. The setable range is from level 2 to
5 (5 = loudest). The digital telephone can
be manually adjusted using the volume
control for each call over the full range of 1
to 9.
Privacy button
3, Code 53
Allows non-private stations to deny privacy-
override to other stations when privacy
button is activated. This prevents overrride
calls by pressing common CO line button
appearances.
Busy and group station LCD station None Busy station messaging:
messaging which is available in
RI,
Allows an LCD message to be sent (live)
but not R2, is available in R3 to a busy LCD station.
Group station messaging:
Allows an LCD station to set a “called or
calling station message” for another
station or a group of stations.
“O+” credit card calls that bypass
toll restriction but do not allow
operator placed calls
43 and 60-7 _ -
Selected stations can be configured in
programming to be allowed “O+” dialing
which will override toll restriction on
selected CO lines or all CO lines. If a
station does not dial a programmable
number of digits after dialing “O”, the call
will be disconnected after 10 seconds.
Data Interface Station Hunting
22
- Allows data calls to busy data stations to
hunt to an idle data station. This program is
separate from voice call hunting,
Program
33. Voice and data calls to the same
station can hunt to different stations.
*All program numbers are underlined in this column.
2-38