Filter
Top Products
FEATURE USE
FEATURE USE
CALL TRANSFER WITH CAMP-ON (continued)
cl) Press the m button (if conversing on a CO line).
l
Existing CO call is put on hold.
l
The camped-on line rings at your station.
l
CO LED changes to the Incoming Call flash rate.
c2) Press the
q
button to answer the call.
l
CO LED changes to the In-use flash rate.
CONFERENCE CALLS
TO CONFERENCE UP TO TWO STATIONS AND TWO CO
LINES, OR THREE STATIONS AND ONE CO LINE
Establish a CO line call using a CO line button, dial the appropri-
ate access code, or you may already be talking on a CO line call.
TO ADD A SECOND CO LINE
1) Press the m button.
l
You hear intercom dial tone.
l
CO LED flashes at the Conference rate.
l
INT LED flashes at the fast rate.
2) Access a second CO line’ and dial the next telephone
number.*
3) Press the m button after the party answers.
l
CO LEDs flash at the In-use rate.
l
All parties will be conferenced.
NOTES:
1. Press a
q
line button or dial an access code: 701 *
736, line number; 87 w 88, line group number; or with
Releases
2 and 3, LCR access code “9” is allowed.
2. If you receive a busy tone or no answer, return to the
original connection by pressing the
q
button. If the
line is not on your telephone, hang up and the original
connection will recall you immediately.
CONFERENCE CALLS (continued)
TO ADD ANOTHER STATION
1) Press the m button.
l
You hear intercom dial tone.
l
CO LED flashes at the Conference rate.
l
INT LED flashes at the In-use rate.
2) Dial the number of the other station.’
3) Press the m button after the party answers.*
l
CO LED(s) will flash at the In-use rate.
l
All parties will be conferenced.
4) Repeat to add another party:
l
Three stations/one CO line maximum.
5) Hang up when conference call is completed.
NOTES:
1. If you receive a busy tone or no answer, return to the
original connection by pressing the m but-
ton.
2. Thenewstation willnotbeconferencedunless the user
lifts the handset or presses the m button to answer.
TO CONFERENCE UP TO FOUR STATIONS ON ONE
INTERCOM LINE
1) Establish a two-station intercom call.
2) Press the m button.
l
You hear intercom dial tone.
l
INT LED flashes at the Conference rate.
3) Dial the third station’s number.
4) Press the m button after the party answers.
l
INT LED flashes at the In-use rate.
l
All parties will be conferenced.
5) To add the fourth party, repeat steps 2 * 4.
24
25