Filter
Top Products
Port
E
Hold
Time
PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS
SECTION 200-096-302
FEBRUARY1991
PROGRAM37
RlNGTRANSFER(CAMP-0N)RECALLTlME
SELECT = Port Number (00-95)
HOLD TIME = Ring Transfer Recall Time
Enter the number of the port that
Enter the Ring Transfer Recall
needs a Ring Transfer Recall time
Time (in seconds). The acceptable
assigned. See Note 3 for
range is 011 - 999 seconds. Use
entering a range of ports.
three digits. See Note 4.
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data assigns a Ring Transfer Recall Time of 032 seconds to all ports.
3. To enter a range of ports, key in the sequence:
q OHO[7
/ \
Low port High port
4. The acceptable range of Ring Transfer Recall Times is 1 I seconds to 999 seconds (16.65 minutes).
5. Ring Transfer Recall Time is the time it takes to recalla station
that originates an
unanswered or busy
(camped-on) transferred call.
6. Ring Transfer must be allowed
(Program 10-1,
LED 07 “ON’~ for transfer recall to function; otherwise
Recall will be immediate.
32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95
2-81