Toshiba DK56 Telephone User Manual


 
FEATURE USE
CONFERENCE CALLS (continued)
CALL FORWARD-BUSY/NO ANSWER (continued)
TO SET CALL FORWARD-NO ANSWER
1) Press the m button (or dial m 11 a).
l
CFNA LED flashes red (or hear confirmation tone).
2) Dial the station number to which calls will forward
l
Listen for confirmation tone if B 1 u was dialed.
3) Press the m (or m) button.
l
CFNA LED on steady.
l
Calls will forward to stored station number.
TO CANCEL CALL FORWARD-NO ANSWER
Press the m button (or dial m 11 B).
l
CFNA LED oes off (or hear confirmation tone).
l
Pressdbutton if~~[~wasdialed.
NOTE:
If call forward is set:
l
CO lines that ring your station only will forward-CO
lines that ring more than one station will not forward.
l
CO line calls transferred to your station will forward.
l
Intercom calls will forward.
l
Call forward redirects the station hunt feature.
l
Call forward must be set before the call is received.
CALL FORWARD-BUSY/NO ANSWER
For intercom and CO line calls (all calls will forward immediately
to a selected station whenever your telephone is busy, or if not
answered calls will forward within 12 seconds or three rings,
whichever ‘occurs first).
TO SET CALL FORWARD-BUSY/NO ANSWER
1) Press the m button (or dial m 1 i I).
l
CFB/NA LED flashes red (or hear confirmation tone).
2) Dial the station number to which calls will forward.
l
Listen for confirmation tone if B B 1 was dialed.
3) Press’ the m (or m) button.
l
CFB/NA LED on steady.
l
Calls will forward to stored station number.
TO CANCEL CALL FORWARD-BUSY/NO ANSWER
Press the m button (or dial m B B I).
l
CFB/NA LED oes off (or hear confirmation tone).
l
Press d button if mimm was dialed.
NOTE:
If call forward is set:
l
CO lines that ring your station only will forward-CO
lines that ring more than one station will not forward.
l
CO line calls transferred to your station will forward.
l
intercom calls will forward.
l
Call forward redirects the station hunt feature.
l
Call forward must be set before the call is received.
CALL FORWARD-FIXED
All intercom and CO line calls to your station will forward to a
predetermined station or voice mail device. The “Forward to”
station/device is determined (Fixed) in system programming for
each station. Your station will not ring when Call Forward-Fixed
is set.
TO USE FIXED CALL FORWARD (ALL CALLS)
1) Press the m button.
l
CFF LED on steady red.
l
All calls will forward to the fixed programmed station.
2) To cancel, press the m button again.
. CFF LED off.
NOTE:
If call forward is set:
l
CO lines that ring your station only will forward-CO
lines that ring more than one station will noiforward.
30
31