Filter
Top Products
PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 200-096-302
FEBRUARY 1991
PROGRAM 33
I
STATION HUNTING (VOICE CALLS ONLY)
SELECT = Port Number (00-95)
Enter the port number
of the Hunt From station.
See Note 3 for entering
a range of ports.
HUNT TO = (00-95)
Enter the Hunt To
port number.
See Note 4.
32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
48 49 50 51 52 53 54 55 56 57 58 59 60 61
62 63
64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data does not assign Hunt To points to any port.
3. A range of ports may be assigned by pressing the following key sequence:
4. Press LED/key 01 to delete a digit from Hunt To port.
q OHOI7
7 \
5. If a Hunt station is in Call Forward, calls will be directed to the forwarded Low port
destination.
6. CO lines will Hunt if they are programmed to ring at the Hunt station only;
CO lines that ring at more than one station in any given ring program (81-
89) will not Hunt.
High port
2-76