Filter
Top Products
FEATURE USE
FEATURE USE
AUTOMATIC CALLBACK (INTERCOM) (continued)
5) Dial the desired telephone number.*
6) Hang up when the call is completed.
NOTES:
1.
You may cancel the request at any time prior to the
actual callback by
11 (or press the A
ressing them button and dialing
$1
: button).
2. If the original call was made using LCR (dial m, the
telephone number is automatically dialed in step 4.
3.
If, after answering a callback, you hear a busy tone, it
means the trunk has already been seized or received
an incoming call. Yourrequest is not cancelled. You will
be called again the next time a trunk becomes idle.
ACCOUNT CODE CALLS
On some calls, you may be required (forced) to dial an account
code before dialing an outside number. On other calls, you may
wish to record an account code voluntarily after either dialing an
outside number or receiving an incoming call. The code you enter
will be recorded on the Station Message Detail Recording
(SMDR) printout with the details of your call. Account codes may
be verified or nonverified.
TO RECORD A FORCED ACCOUNT CODE (Outgoing Calls
Only)
1) Access a CO line.’
l
You hear dial tone.*
2) Dial the -digit account code with the dialpad.
l
Dial tone stops after you dial the first digit.
l
You will hear dial tone after you press the last digit of
a valid account code.
. . . or. . .
l
You will hear busy tone after you press the last digit of
an invalid code.
3) Dial the outside directory number.
ACCOUNT CODE CALLS (continued)
NOTES:
I. Press a
q
button, dial a CO line access code, or dial
1 to call via LCR.
2. 1 calling via LCR, CO dial tone will not be returned.
3. Unless you dial the correct number of digits, you willnot
receive dial tone.
4. Any digits dialed after the code will be treated as part
of the outside directory number.
EMERGENCY OVERRIDE OF FORCED ACCOUNT CODE
DIALING REQUIREMENTS
Forced account code requirements can be bypassed by three
emergency numbers, including 911. See your system adminis-
trator for these numbers:
1)
911 2)
3)
TO RECORD A VOLUNTARY ACCOUNT CODE (Incoming
or Outgoing)
1) Anytime during the call, dial p 11 or press the B
button (the conversation will not be interrupted).
2) Dial the account code.
l
If the code is valid, you will hear a confirmation burst
tone (l/2 second duration).
. . .
or. . .
l
If the code is invalid, you will heartwoshortconfirmation
burst tones. Repeat steps 1 and 2 to dial another
account code, or hang up.
. . . or. . .
l
If the code is nonverified, you will not hear a confirma-
tion tone.
NOTE:
Confirmation tones are inaudible to the other party.