Filter
Top Products
CALL HOLDING
CALL TRANSFER WITH CAMP-ON
TO HOLD A CALL
1) While connected to an outside call, flash the hookswitch.
l
You will hear intercom dial tone.
2) Dial 10 and hang up (at least 2 seconds).
l
You may now originate or receive other calls.
TO RETURN TO CALL ON HOLD*
1) Lift the handset.
l
You will hear intercom dial tone.
2) Dial B 1.
l
You will be reconnected with the call.
NOTES:
1. If you do not return to the call within a designated time
period, your telephone will ring to recall you.
2. Any other station can pick up the held call by:
l
Dialing m B + N (N = the intercom number of the
station that laced the call on hold).
l
Dialing m
ii
0 + N (N = the number, 0 1 m 36, of the
held CO line),
Release
2 and higher.
This feature allows you to transfer an outside call to a station that
is either idle or busy.
TO TRANSFER A CALL
1) While connected to an outside line, flash the hookswitch (l/
2 second).
l
You will hear intercom dial tone.
2) Dial the station number to which the call is to be transferred.
3A) If the called station is idle:
l
You will hear a single ring tone.
4A) Announce the call when the station answers, or hang up to
ring-transfer the call.*
. . or. .
3B) If the called station is busy:
l
You will hear busy tone.
48) Hang up.
l
The call is camped-on to the busy station.*
NOTES:
1. Flash the hookswitch to reconnect to the line before it
is transferred. (If the called station has lifted the hand-
set or depressed the m button, a conference will be
formed by the hookswitch flash.)
2. The call will recall you and camp-on is cancelled if the
station does not answer within a predetermined time.
Inform the caller of the situation, and repeat the proce-
dure, if necessary.
6