Filter
Top Products
FEATURE USE
TOLL RESTRICTION OVERRIDE/TRAVELING CLASS
(continued)
l
You will hear confirmation tone.
4) Repeat steps 1 w 4 to enter more toll restriction override or
traveling codes.
NOTES:
7. Traveling class is available with Release 3 only.
2. For security reasons, the change access code is not
provided in this guide. It is available from your tele-
phone system maintenance provider.
TONE SIGNALING
PROGRAMMABLE OPTION
Provides ringing on incoming intercom calls when voice an-
nouncing is not activated.
TO MAKE A TONE SIGNAL CALL
1) Call another station via intercom.
l
The called party hears one ring, then our voice.
2) To send ring tone to the called party, dial
Iii
.
3) Speak to the party when the call is answered.
TO ANSWER A TONE SIGNAL CALL
1) Lift the handset or press the m button (handsfree an-
swerback is inoperative).
2) Hang up when the call is completed.
,
VOICE MAIL (VM)
Whenever your station is call forwarded to voice mail, certain
digits will automatically be sent to the voice mail unit to direct the
call to your voice mail box.
TO STORE THE DIGITS TO BE SENT
VOICE MAIL (VM) (continued)
and pauses to be sent (see Note).
button to store data.
NOTE:
Use m or= button to store pauses.
When you wish to retrieve your messages from voice mail,
certain digits will automatically be sent to the voice unit to play
back your messages after you press the message waiting button.
TO STORE THE DIGITS TO BE SENT
1) Press the m button.
2) Dial RIO.
3) Dial the re
i
uired di its and pauses to be sent.
4) Press the * (or d) button to store data.
TO RETRIEVE MESSAGES
Press the m and m buttons.
TO CLEAR ALL DIGITS
1) Press m.
0.
).
NOTE:
The above procedures are required for initial VM set-up
only. The digits remain in memory until changed.
1) Press the m button.
2) Dial 111.
50 :,, .’