Filter
Top Products
FEATURE USE
CALL FORWARD-NO ANSWER (continued)
NOTE:
If call forward is set:
l
CO lines that ring your station only will forward-CO
lines that ring more than one station will not forward.
l
CO line calls transferred to your station will forward.
l
Intercom calls will forward.
l
Call forward redirects the station hunt feature.
l
Call forward must be set before the call is received.
CALL FORWARD-BUSY/NO ANSWER
(Release 2 and higher)
For Intercom and CO line calls (all calls will forward immediately
to a selected station whenever your telephone is busy, or if not
answered calls will forward within 12 seconds or three rings,
whichever occurs first).
TO SET CALL FORWARD-BUSY/NO ANSWER
1) Press the I;l=fllm button (or dial m 1 m I).
l
CFB/NA LED flashes (or hear confirmation tone).
2) Dial the station number to which calls will forward.
l
Listen for confirmation tone if 11 i was dialed.
3) Press them (or m) button.
l
CFB/NA LED on steady.
l
Calls will forward to stored station number.
TO CANCEL CALL FORWARD-BUSY/NO ANSWER
Press the m button (or dial m i 11).
l
CFB/NA LED goes off (or hear confirmation tone).
l
Press SPKR button if INT 6 0 4 was dialed.
’
NOTE: ’
If call forward is set:
l
CO lines that ring your station only will forward-CO
lines that ring more than one station will not forward.
l
CO line calls transferred to your station will forward.
l
Intercom calls will forward.
CALL FORWARD-BUSY/NO ANSWER (continued)
l
Call forward redirects the station hunt feature.
l
Call forward must be set before the call is received.
CALL FORWARD-FIXED
All intercom and CO line calls to your station will forward to a
predetermined station or voice mail device. The “Forward to”
station/device is determined (Fixed) in system programming for
each station. Your station will not ring when Call Forward-Fixed
is set.
TO USE FIXED CALL FORWARD (ALL CALLS)
1) Press the m button.
l
CFF LED on steady.
l
All calls will forward to the fixed programmed station.
2) To cancel, press the m button again.
. CFF LED off.
NOTE:
If call forward is set:
l
CO lines that ring your station only will forward-CO
lines that ring more than one station will not forward.
l
CO line calls transferred to your station will forward.
l
Intercom calls will forward.
l
Call forward redirects the station hunt feature.
l
Call forward must be set before the call is received.
CALL HOLDING
TO HOLD A CALL (CO line or a button appears on your
station)
While connected to a CO line or intercom call, press them
button.
l
CO or intercom LED flashes at the On-hold rate. ,
l
To reconnect the call, press the CO or INT button on hold.
28
29