Filter
Top Products
PROGRAMMINGPROCEDURES-INTRODUCTION
SECTION 200-096-301
FEBRUARY1991
TABLE I-B (continued)
MULTIDIMENSIONALPROGRAM: PROGRAM30,
STATION CLASSOFSERVICE
Press...
Step
m + LED keys
#
Action description
LCD RESPONSE . . .
6.
LED keys 01 - 20 (continued)
LED 12 and 13: Digital Telephone Handset Receiver
Volume (Release 3).
LED 14: Account Codes Verified (Release 3).
LED 15: Verified Account Code Revision Authority
(Release 3)
LED 16: Traveling Class of Service Code Revision
Authority (Release 3).
LED 17: Do Not Disturb Override Allowed.
LED 18: Executive Override Allowed.
LED 19: Privacy Overrided Allowed
LED 20: Not Used
If programming a port range, the LED indications are
as follows:
l
LED-ON, all ports in range are enabled for that
item.
l
LED-OFF, all ports in range are disabled for that
item.
l
LED-FLASHING, some ports in range are enabled
and some ports are disabled.
7. m
Secure data in system programming.
8. m
Prepare system for another selection (go back to
step 5), or exit Program 30 (continue with step 9).
30 SELECT = (00 -, 95)
DATA PROGRAMMED
30 SELECT =
9.
iim
Secure Program 30 data in system memory.
10. m
Exit Program 30. Enter another program number (see
Table Q), or exit programming mode (go to step 11).
System beeps to indicate it is exiting Program 30.
11. [[m
Exit programming mode.
30 SELECT = ##
DATA PROGRAMMED
PROGRAM =
NO. 205
JAN 20 SUN
06:58
1-5