Filter
Top Products
16
TO DISPLAY BUSY FIELD STATUS ON THE LCD DISPLAY
1) Press the m button.
l
The LCD displays, MODE NO.?
2) Dial 0. Refer to the figure in Summary of LCD Functions.
3) Press the m button to rotate Busy Field groups.
MODE EXIT
TO EXIT ANY MODE
1) Press the m button.
l
The LCD displays, MODE NO.?
2) Dial 1.
l
The LCD displays date/day/time.
DISA SECURITY CODE: ADD/DELETE/CHANGE
From designated station(s) only.
TO STORE NEW DISA SECURITY CODE
1) Press them button and dial CI 0 0’ (3-digit access code).
0 Receive confirmation tone.
(
2) Dial the new DISA security code (a . . . Q).’
3) Press the 1 button.
0 Receive confirmation tone.
NOTES:
1. For securitypurposes, the 3-digit access code is not given
in this guide. It is available from your telephone system
maintenance provider.
2. The DISA security code can be 1 m 15 digits.
3. To .cancel the DISA code, complete steps 1 and 3,
. .
DISA SECURITY CODE: ADD/DELETE/CHANGE
(continued)
skipping step 2. If the DISA code is canceled, outgoing
access of CO lines on DISA calls will not require a security
code.
TOLL RESTRICTION OVERRIDE/TRAVELING
CLASS CODE CHANGE
TO ADD, DELETE, OR CHANGETOLL RESTRICTION OVERRIDE
OR TRAVELING CLASS CODES FROM STATIONS SELECTED
IN SYSTEM PROGRAMMING.
1) Press m and dial the three-digit toll restriction override
change access code Q 0 CL2
l
You will hear confirmation tone.
2) Dial the four-digit override code c3 Q Lt CI.
I
NO. N’NN
ENTER OUR CODE ~~0~
I
3) Press the 1 (or m)button to store code.
l
You will hear confirmation tone.
I
NO. NNN
DATA PROGRAMMED
I
4) Repeat steps 1 * 4 to enter up to four traveling class codes or
two toll restriction override codes.
NOTE:
For security reasons, the change access code is notprovided
in this guide. It is available from your telephone system
maintenance provider.
_ ;i
17