Filter
Top Products
80 Chapter 6 Configuration
7. If you have hot desking agents, enable the Uses hot desking agents check box.
8. Specify the licenses to use for the media server.
For example, select Call Accounting if you are applying a Call Accounting license. If you are not
licensed for a product the check box for that product does not show. If you have no remaining
licenses, although the check box still shows, an error message indicates that all available licenses
have been used.
9. After IP/DNS address, specify the IP.DNS address of the media server.
10. After Username, type the username used to connect to the telephone system.
11. After Password, type the password used to connect to the telephone system.
12. After Confirm password, type the password used to connect to the telephone system.
13. Click the Test Connection button to test the connection between the media server and the telephone
system.
This connection is required to ensure Synchronization functionality.
14. If this media server is part of a Mitel cluster, under Cluster setting, select the This media server is
part of a Mitel cluster check box. Otherwise, skip to step 18.
15. After Cluster ID, type the cluster ID.
The cluster ID can be found on the telephone system.
16. After Cluster ID Digits, type the digits used to identify the cluster.
17. After Cluster name, select the cluster name.
18. Click Save.
19. Specify the location settings.
See “Configuring location settings for a 3300 ICP in YourSite Explorer” on page 80.
Configuring location settings for a 3300 ICP in YourSite Explorer
To configure location settings for a 3300 ICP in YourSite Explorer
1. Click the Location tab.
2. After Country, select the country where the media server is located.
If you are setting up a node, select the country in which the node is located.
3. After Area, select the area code where the media server is located.
If you are setting up a node, select the area in which the node is located.
4. After Minimum digits to dial locally, type the minimum number of digits dialed for a local call in your
city.
5. After Maximum digits to dial locally, type the maximum number of digits dialed for a local call in your
city.
6. After Outbound dialing prefix, type the number you dial to access an outside line.
This information is required if you use a general business model and want to view when phone
extensions are active or inactive.
7. After ARS Digit, type the prefix number you dial for internal calls.
8. Specify the data collection settings options.
See “Configuring data collection settings for a 3300 ICP in YourSite Explorer” on page 80.
Configuring data collection settings for a 3300 ICP in YourSite Explorer
To configure data collection settings for a 3300 ICP in YourSite Explorer
1. Click the Data collection tab.
2. If you do not use OPS Manager, click TCP. Otherwise, skip to step 8.
3. After SMDR, type the SMDR port number of the media server.
4. If you will be entering ACD information, enable the ACD check box.
5. After ACD, type the ACD port number of the media server.
6. If you use Traffic Analysis, enable the Traffic Analysis check box.
7. After Traffic Analysis, type the Traffic Analysis port number of the media server.
8. If you use OPS Manager, click Enterprise Manager (OPS Manager).
9. After IP/DNS address, type the IP address, or name, of the OPS Manager computer.