Filter
Top Products
Stations
assigning dial access to line pools, 3-39 — 3-41
assigning lines and line pools to, 3-36 — 3-38
Supplemental Alert Adapter, 1-35, 2-122
Surge protection
See Grounding
System
accessories, description of, 1-31 — 1-35
administer changing, 3-63 — 3-70
architecture, 1-36 — 1-40
capacity, 1-44
directory label, 2-24
renumbering, procedure for, 3-64
upgrading, administration for, 3-62
System Information Report printout
BIS-34D console administration, 3-107
Display console administration, 3-91
system size, 1-4
changing, 3-65 — 3-66
setting, 3-21 — 3-22
System Speed Dial
assigning codes, 3-91, 3-108
BIS-34D console administration, 3-108
Display
Console administration, 3-91
enlarged for release 3, 1-9
printing codes, 3-91, 3-108
System
type,
1-4
changing, 3-66 — 3-68
procedure for setting, 3-22 — 3-23
System wiring, description of, 2-12 — 2-33
T
Tables
AT&T 475/476 printer DIP switch settings,
2-85
CO line wiring, 6-position jack, multipair,
2-48
CO line wiring, 6-position jack, single-pair,
2-46
CO line wiring, 6-position jack, two-pair,
2-47
Default tie line settings, 3-53
Display console station shift buttons, 3-7
Features compatibility, 3-72
4-pair wiring for MERLIN II system, 2-46
MERLIN II system capacities, 1-44
MERLIN II system features, 1-11 — 1-17
Tables (continued)
Port requirements for system accessories, 1-44
Products: adjunct equipment, 5-6 — 5-7
Products: control unit, 5-1 — 5-2
Products: voice terminals, and accessories,
5-3 — 5-5
Tie line DIP switch settings, 3-52
Unit load rating of MERLIN II system voice
terminals
and accessories, 2-59
Wiring parts cross reference, 2-45
Wiring reference, 2-45 — 2-49
Wiring tie line ports to network interface,
2-49
Telephone, power failure, 2-122
Testing
intercom calls, 2-101 — 2-103
for intercom
dial tone, 2-100
Intercom-Ring, 2-102
Intercom-Voice, 2-101
outside lines, 2-103 — 2-104, 4-56 — 4-57
for outside line dial tone, 2-101
tie lines, 2-104 — 2-106
Tie line
dial tone, 1-49
direction, 1-47
module controls and indicators, 1-25
module, installing, 2-80
troubleshooting, 4-11 — 4-29
type,
1-47
Tie line jacks.
See Jacks
Tie lines
administration
of,
3-50 — 3-62
answer supervision time, selecting, 3-57
description
of,
1-9
dial tone, selecting, 3-56 — 3-57
dialing mode, selecting, 3-56
direction, selecting, 3-53 — 3-54
disconnect time, selecting, 3-58
inward dial plan, flexible renumbering,
3-59 — 3-61
inward dial plan, selecting, 3-59
line
type
selecting, 3-54 — 3-55
printing inward dial plan, 3-61 — 3-62
signal type, selecting, 3-55
testing, 2-104 — 2-106
Type 1 Compatible, testing, 4-18 — 4-23
Type 1 Standard testing, 4-11 — 4-18
Type 5 Simplex, testing, 4-23 — 4-29
Index I-7